Digital dimmer of 6 channels and 3KW per channel (independent neutrals)
6-channel dimmer of 3 kW per channel. It is ideal for applications where is necessary to have power distributed in different rooms of a building. Although POWER 6-3 EM (HALL LIGHTING) is similar to Power 6-3 EM, the former incorporates a power supply with three-independent neutral to protect separately the three phases and to avoid total turn off in case of one-phase failure.
Load is duly controlled by 40Amp. triacs which are cooled by a black anodised aluminium radiator and a fan.
All dimmer channels may be addressed by three rotating switches on the rear panel. An LCD display is included in order to visualize information to make the programming stage and functions easier.
Background lighting can be independently adjusted through six potentiometers or be left in a fixed position, which means in some cases, to use the dimmer without control desk.
Charge outputs are effected separately by a 16-Amp breaker per each channel, which protect one of the poles. There are several leds on the front panel, one of which confirms the arrival of digital signal to the dimmer, the closest to this one indicates start up of the equipment, and the other six led located by the adjustment potentiometers show the output level activation of each channel.
There are four curves applicable to each channel: linear with voltage, linear with light, fluorescence and ON / OFF. A test function is also included for external checking of the installation, both for signal and power.
These are the programmable functions of this unit: ·Channel number addressing ·Selecting the type of curve for each channel ·Minimum and maximum levels per channel ·Selecting the chaser to run ·Test function ·Channel level in Panic mode
Optionally, Panic module can be adapted. Its function is to activate a particular lighting state, which is programmable, for emergency situations.
